空调制热要多久，请问空调制热要多久才开始出

　　空调制热要多久，请问空调制热要多久才开始出暖气？

　　据和记百科网站「一齐坐拥美梦」消息，近日，空调制热要多久，请问空调制热要多久才开始出暖气？引发热议，空调制热要多久才开始出暖气同样引起许多争议，对此众网友各抒己见。但到底是怎么回事呢？和记百科为您解答。

　　

空调制热要多久

 

　　 演示机型：美的KFR-26GW/N8MJA3系统版本：变频空调

　　空调制热要5-10分钟，因为在冬季空调制热时，为了避免刚开机时吹出来凉风，所以空调有防冷风功能，只有在空调内机盘管的温度达到一定数值，空调内机的风扇才会启动并吹出热风。

　　空调制热的原理：

　　1、将室外的热量送进室内，把室内的低温再送出室外，所以空调制热时，室外机吹出的风是冷风，打开空调器制热时，这时空调器室外机的压缩机和风扇会高速运转。

　　2、室外机上的风扇就通过室外机后部和侧面的开口从空气中往室外机内部进行吸风，通过室外机上蒸发器来吸取空气的热量，吸取完热量后再用室外机的散热器来释放低温，然后一直这样循环。

　　3、室外机上的蒸发器吸取了室外热量，再通过蒸发器内部管道里的制冷剂，就是R22，也就是氟利昂。进入室外机内部的压缩机，再把已经吸取了热量的气体状制冷剂制热，变成高压、高温的液体。

　　4、通过连接室内机和室外机的铜质管道进入室内机，室内机下端的风扇开始工作，把室内的空气通过下部进风口吸入室内机然后通过上方的蒸发器及管道。蒸发器里面的管道内是已经被室外机内部的压缩机制热成高温、高压的液态氟利昂，室内机内部的蒸发器就是是通过管道内的高压、高温的液态氟利昂把它制热的。

　　

空调制热要多久才开始出暖气

 

　　答：5到10分钟。一般5到10分钟才会出热风，因为在冬季空调制热时，为了避免刚开机时吹出来凉风，所以空调有防冷风功能，只有在空调内机盘管的温度达到一定数值，空调内机的风扇才会启动并吹出热风。

　　

　　【英文介绍/For English】：

　　

　　Demo model: Midea KFR-26GW/N8MJA3

　　System version: inverter air conditioner

　　It takes 5-10 minutes to heat the air conditioner. In order to avoid the cool air blowing out when the air conditioner is just turned on, the air conditioner has the function of preventing cold air. Only when the temperature of the coil of the air conditioner reaches a certain value, the air conditioner The fan will start and blow hot air.

　　The principle of air conditioning heating:

　　1. The outdoor heat is sent into the room, and the low temperature in the room is sent out to the outside, so when the air conditioner is heating, the air blown by the outdoor unit is cold air. When the air conditioner is turned on for heating, the compressor and fan of the outdoor unit of the air conditioner will run at high speed.

　　2. The fan on the outdoor unit sucks air from the air to the inside of the outdoor unit through the openings on the back and side of the outdoor unit, absorbs the heat of the air through the evaporator on the outdoor unit, and then uses the radiator of the outdoor unit to absorb the heat. Release the hypothermia, and cycle like this all the time.

　　3. The evaporator on the outdoor unit absorbs the outdoor heat, and then passes through the refrigerant in the internal pipeline of the evaporator, which is R22, which is Freon. The compressor inside the outdoor unit heats the gaseous refrigerant that has absorbed heat and turns it into a high-pressure, high-temperature liquid.

　　4. Enter the indoor unit through the copper pipe connecting the indoor unit and the outdoor unit, the fan at the lower end of the indoor unit starts to work, and the indoor air is sucked into the indoor unit through the lower air inlet and then passes through the upper evaporator and pipes. The pipeline inside the evaporator is heated by the compressor inside the outdoor unit into high-temperature, high-pressure liquid freon, and the evaporator inside the indoor unit is heated by the high-pressure, high-temperature liquid freon in the pipeline.